contact us
You will find Kuhnke pneumatic valves divided into three sections of this site. On this page you can see an overview of the extensive selection of Kuhnke standard pneumatic valves. The list includes manually, mechanically, pneumatically and electrically operated valves from 1/8" to 1/2" ports. Included here are some hard to find products such as flip-flop valves, the plugs, manifolds and accessories and the Kuhnke range of ISO valves. Miniature valves, for example M5 ports, and the Kuhnke range of valve islands for interfacing with PLCs can also be found elsewhere on this site.
|
Manually Operated Valves General purpose push buttons, toggle switches, knob operators, key switches and foot pedals. Go to Mechanically and Manually Operated Valves page |
|
Mechanically Operated Valves Flat levers, plungers, roller levers (limit switch) and cats whisker versions of 2/2, 3/2 and 5/2 valves. Go to Mechanically and Manually Operated Valves page |
|
Pneumatically Operated Valves Both spool and poppet designs from 1/8 to 1/2 inch porting. 3/2, 5/2 and 5/3 versions. Go to Pneumatically Operated Valves page |
|
Electrically Operated Valves Kuhnke Series 75 Solenoid operated valves satisfy most pneumatic system design requirements. Valves use an air piloted solenoid system complete with a red manual over ride lever for testing circuits. Air pilots are standard throughout the line. Coil systems consume only 2.5 watts of power and operate in 15-20 ms making the valve line compatible with most electronic controller outputs. Go to Electrically Operated Valves page |
|
ISO Valves ISO valves are manifold or sub base mounted designed to a European specification standardising air flow, drilling and valve body sizes. Included in this range are ISO-1 and ISO-2 valves. Go to European Valves page |
